Remove any dirt, oil, blistered paint, and dust from the application surfaces. Correct surface defects using San Deco Acrylic Putty Interior. For surfaces with old paint or surfaces to be painted, apply a coat of San Deco Uniprimer as an undercoat.

-Before application, dilute Chalkboard with 5% water and mix it thoroughly.

-Apply two coats using a roller, brush, or spraying method. Wait a minimum of 3-4 hours before applying the second layer.

-Ensure that the application environment maintains a temperature between +5°C and +35°C for 24 hours during and after the application.

Allow 2-3 hours for the paint to dry to the touch, 24 hours for it to completely dry, and after 72 hours, the surface will be ready for use in a 23°C environment.

Depending on the surface smoothness, its porosity, and the application methods, for a single coat application:

• 1 liter covers an area of 16 – 20 m².
• 1 kilogram covers an area of 13.4 – 16.8 m².
• The paint consumption for 1m² area is 50 – 62.5 milliliters and 60 – 75 grams (g).

TDS

• FP.002.ENG_CHALKBOARD_TDS_ENG.pdf

SDS

• CHALKBOARD_DEKA_BOYA_SDS_330051_Ver.3.0EN.pdf