Sandeco - Acrylic Putty Exterior

Acrylic Putty Exterior

APPLICATION AREA

It is utilized to fill pores in mineral-based exterior surfaces such as concrete, lightweight concrete, aerated concrete, or plaster.

}
Acrylic Putty Exterior

FEATURES

– High adherence and aspiration ability.

– Forms a very durable, smooth and non-chalking surface.

– Decrease in wastage/consumption of the paint.

– Not much chalking during sanding process.

– It smooths the surface with maximum 2 coats.

– As it is water-based, it is harmless to human health and environment.

ADDITIONAL FEATURES

Sandeco

Clean all dirt, oil, blistered paint and dust off the application surface.

Sandeco

– Acrylic Putty Exterior must be mixed thoroughly prior to application.

– Acrylic Putty Exterior must be applied with steel trowel as one or two coats depending on the surface roughness.

– 24 hours after the putty application, defects on the surface and trowel marks must be smoothed with sandpaper.

– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.

Sandeco

Allow 4-6 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.

Sandeco

Depending on surface smoothness, porosity and application methods, for a single coat application;

  • 1 lt covers 2,25 – 4,5 m² of surface,
  • 1 kg covers 1,25 – 2,5 m² of surface,
  • The paint consumption for 1m² area is 220 – 450 ml and 400 – 800 grams (g).