After all kinds of dirt, oil, bloated paints, and dust are cleaned from the surfaces, surface defects should be corrected with SAN DECO ACRYLIC PUTTY EXTERIOR and primed with SAN DECO DECOPRIMER.

• Before the application, soften the Marmorosso Marmorino Exterior by mixing it thoroughly using a spatula or trowel without diluting it.
• Apply the first coat using a steel trowel. Depending on the ambient temperature, the second coat application can be started after 6-8 hours.
• Apply the second coat in a thickness appropriate to the desired texture and pattern effect. In the second coat, distribute the product homogeneously using a steel trowel by pressing in various directions.
• After the product begins to shrink, and depending on the ambient temperature, the wetness on the surface gradually becomes matte. Meanwhile, apply a small amount of product to the surface by pressing it in various directions using a steel trowel until the surface becomes completely homogeneous.
• Then, polish the product using a clean steel trowel. The more the product is polished with a trowel until it dries, the brighter the product will be.
• Since the product is natural lime-based, the color of the wet product will lighten by 4 to 5 tones after drying.
• It is recommended to use a single batch of product in the same project. In cases where more than one batch is used, it is recommended that the batches are mixed with each other in equal proportions to prevent batch-based differences.

At 23˚C and 50% humidity, dry-to-touch time is 6-8 hours and complete drying time is 24-48 hours.

Depending on surface smoothness, porosity and application methods, for a single coat application: · 1,2 – 1,6 kg for 1 m2

SAN DECO MARMOROSSO EXTERIOR-SDS