Click here for the product brochure.

• After thoroughly removing any dirt, grease, blistered paint, and dust from the application surface, proceed to rectify surface defects using San Deco Acrylic Putty Interior, followed by an application of San Deco Decoprimer as an undercoat.

• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• The complete drying time is 24 hours.
• Once the undercoat is completely dry, apply Atracto to the surface.
• Stir Atracto homogeneously using a mixing spatula without diluting.
• Then, apply to the surface in two coats.
• In the first coat, apply Atracto to the surface using a sponge or a flexible steel trowel.
• After about 6 hours and depending on the ambient temperature, apply the second coat to the surface.
• Apply the second coat using a flexible steel trowel. Then, complete the application by giving patch patterns using a trowel.
• The complete drying time is 24 hours.

• Wait 2-3 hours for touch dry and 4 hours for complete dry under standard environmental conditions at 23°C.

The coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods for a single coat:

For Atracto:

• 1 liter covers 5-6 m² of surface.
• 1 kilogram covers 76-118 to 90-140 m² of surface.
• The paint consumption per 1m² area varies between 80-125 milliliters (ml) and 100-150 grams (g).

For Atracto Touch:

• 1 liter provides coverage for an area between 8.5 and 13 m².
• 1 kilogram is sufficient for an area of 7 to 11 m².
• The paint consumption for 1m² area falls within the range of 76-118 milliliters (ml) and 90-140 grams (g).

TDS

• ATRACTO&ATRACTO TOUCH_TDS

SDS

• ATRACTO_SDS