Atracto

Before application, all dirt, grease, peeling paint, and dust should be removed. Any surface defects should be corrected using San Deco Acrylic Putty Exterior and primed with San Deco Decoprimer. 

-During and for 24 hours after the application, it should be ensured that the ambient temperature remains between +5°C minimum and +35°C maximum.
-During the application, it should be ensured that the ambient humidity is below 75%.
-Make sure the humidity value of the application surface is lower than 10%.

-Atracto Exterior should be mixed homogeneously without diluting and applied in two coats using a trowel.
-For brush and roller applications, it should be diluted with 3-5% water, mixed homogeneously, and applied in two coats.
-A minimum of 6 hours should be waited between coats.
-For more detailed application information, product application videos can be watched.
-When using multiple batches in the same project, they should be mixed in equal proportions to prevent batch variations.
-Touch-ups are not recommended. In case of necessary repairs, the affected wall should be entirely re-applied.

• The touch dry time at 23˚C is 5-6 hours and the complete drying time is 24 hours.

• 1 liter of paint covers 8.0 – 12.5 m².
• 1 kg of paint covers 6.5 – 10.0 m².
• The paint consumption for 1 m² is 80-125 ml and 100-150 g.

ATRACTO EXTERIOR TDS EN

ATRACTO EXTERIOR SDS EN