Before application, all dirt, grease, peeling paint, and dust should be removed. Any surface defects should be corrected using San Deco Acrylic Putty Exterior and primed with San Deco Decoprimer.

-During and for 24 hours after the application, it should be ensured that the ambient temperature remains between +5°C minimum and +35°C maximum.
-During the application, it should be ensured that the ambient humidity is below 75%.
-Make sure the humidity value of the application surface is lower than 10%.

-Atracto Exterior should be mixed homogeneously without diluting and applied in two coats using a trowel.
-For brush and roller applications, it should be diluted with 3-5% water, mixed homogeneously, and applied in two coats.
-A minimum of 6 hours should be waited between coats.
-For more detailed application information, product application videos can be watched.
-When using multiple batches in the same project, they should be mixed in equal proportions to prevent batch variations.
-Touch-ups are not recommended. In case of necessary repairs, the affected wall should be entirely re-applied.

• The touch dry time at 23˚C is 5-6 hours and the complete drying time is 24 hours.

• 1 liter of paint covers 8.0 – 12.5 m².
• 1 kg of paint covers 6.5 – 10.0 m².
• The paint consumption for 1 m² is 80-125 ml and 100-150 g.

ATRACTO EXTERIOR TDS EN

ATRACTO EXTERIOR SDS EN