Effects Paints
Effects Paints
APPLICATION AREA
This versatile coating can be applied to a variety of surfaces, including rough plaster, caoncrete, mineral surfaces like cement panels, gypsum board, drywall, fixed plywood, and even surfaces with old paint, both indoors and outdoors.
-It imparts a realistic concrete effect to surfaces.
-It boasts a high alkali resistance, preventing swelling or cracking.
-While effectively keeping water from penetrating from the outside, it allows buildings to breathe by enabling moisture to escape from within.
-Being water-based, it is environmentally friendly and has no harm to human health.
-Additionally, its perfumed formulation enhances the application environment with a pleasant aroma.
Buy
COLORS
Beton Deco is an acrylic emulsion-based decorative coating that replicates the textured appearance of concrete when applied with a trowel containing natural lime. This versatile product, suitable for interior walls, is also offered in an exterior version for outdoor applications.
ALL COLORS
-Remove any dirt, oil, peeling paint, and dust from the surface.
-Correct any surface imperfections using San Deco Acrylic Putty Interior.
-Begin by applying San Deco Primer to the surfaces. It’s recommended to use a primer of the same color as the selected product color for optimal results.
-Mix Beton Deco thoroughly until it becomes homogeneous. If needed, you can add clean water to achieve the desired application viscosity.
-Once the undercoat is completely dry, apply the first coat of Beton Deco evenly to the surface using a trowel.
-After approximately 5-6 hours at a temperature of 23°C, apply the second coat in the same manner, using a steel trowel. You can then smooth the surface with the trowel.
-Different patterns and thicknesses can be achieved with Beton Deco by using various trowel techniques for a unique finish.
-Maintain an environment temperature between +5°C to +35°C for 24 hours during and after the application for optimal results.
Allow 5-6 hours for the surface to become touch dry for complete drying, it may take 24-48 hours under normal environmental conditions with a temperature of 23°C.
Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
