Click here for the product brochure.

• After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with San Deco Acrylic Putty Interior and undercoated with San Deco Uniprimer.

Effect Wind Undercoat Application:

• Choose the Effect Wind Undercoat color based on the color chart.
• Dilute the selected Effect Wind Undercoat with 5-10% clean water.
• Apply the undercoat in two coats using a roller or brush.
• Wait for 4-5 hours between each coat.

Effect Wind Application:

• After the Effect Wind Undercoat has dried, proceed with the application of Effect Wind.
• Use the double-headed effect brush for application
• Dip the double-headed brush into two different Effect Wind colors.
• Apply the product to the wall in all directions without overlapping the two colors.
• Before the product starts to dry, use a brush to spread the grain particles to different directions.

• Wait 4-5 hours for touch dry and 24 hours for complete dry under standard environmental conditions at 23°C.

For a single coat application, the coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods:

• 1.2 liters (0.6 liters + 0.6 liters) covers 10.0 to 12,5 m² of surface.
• 1 kilogram covers 8,3 to 10 m² of area.
• The paint consumption per 1m² area varies between 85-100 milliliters (ml) and 100-120 grams (g).

TDS

• EFFECT WIND UNDERCOAT_TDS

• EFFECT WIND_TDS

SDS

• EFFECT WIND UNDERCOAT_GBF

• EFFECT WIND_GBF