Before application, remove all dirt, grease, peeling paint, and dust from the surface. Surface imperfections should be corrected with San Deco Acrylic Putty Thick exterior filler and primed with San Deco Decoprimer.

-Rockcrest Hyper should be applied undiluted in two coats using a coral roller.
-Allow 5-6 hours for the product to dry between coats.
-For both coats, apply the product homogeneously from bottom to top using the coral roller.
-For more detailed information about the application, please watch the product application videos.
-If multiple batches are used in the same project, it is recommended to mix the batches evenly to avoid any differences between them.
-During and for 24 hours after the application, the ambient temperature should be between +5°C and +35°C.
-During application, the ambient humidity should be below 75%.
-The moisture level of the surface to be painted should be below 10%.

At 23°C, touch dry in 5-6 hours, full drying time is 24-48 hours.

Depending on surface smoothness, absorbency, and application techniques, for a single coat application:
-1 liter covers 2 – 4 m²,
-1 kg covers 1.6 – 3.3 m²,
-Coverage per m² is 230 – 470 ml and 300 – 600 gr.

ROCKCREST HYPER TDS EN

ROCKCREST HYPER SDS EN