Teramix Hydro Ultra

After all kinds of dirt, oil, blistered paint and dust are cleaned from the surfaces of application, the surface defects should be smoothened with San Deco Acrylic Putty Exterior. Already- painted surfaces should be primed with San Deco Uniprimer. as well as the surfaces to be newly painted. It is recommended to use the primer with the same color as the one of the selected facades.

-Teramix Hydro Ultra should be thoroughly mixed until a homogeneous consistency is achieved without being diluted.
-Teramix Hydro Ultra is applied as a single layer with the help of a trowel. The application thickness should be adjusted according to the largest pattern stones contained in the product. The surface should be patterned with a plastic trowel in circular motions.
-Before the application of Teramix Hydro Ultra, surface should be dried completely.
-It should be paid attention that the ambient temperature should be minimum +5°C and maximum +35°C within 24 hours during and after the application.

Allow 4-6 hours for touch dry and 24-48 hours for complete dry at 23°C and %50 RH environment conditions.

For one-layer application, depending on the surface smoothness, absorbency and application techniques;
-1,00 – 1,30 m² with 1 lt
-0,65 – 0,75 m² area is painted with 1 kg,
-Paint consumption for an area of 1 m² is 950 – 1000 ml and 1400 – 1500 gr.

TERAMIX HYDRO ULTRA TDS EN

TERAMIX HYDRO ULTRA SDS EN