Click here for the product brochure.

• Clean the surfaces to be coated, removing any dirt, oil, swollen paint, and dust.
• Correct surface defects using San Deco Acrylic Putty Interior.
• Apply a primer coat using San Deco Decoprimer.

• Before application, thoroughly mix Nostalgie without thinning.
• Apply Nostalgie irregularly onto the surface using a plastic or steel trowel, depending on the desired effect.
• After two days of applying Nostalgie, sand the surface with sandpaper.
• Apply Nostalgie Finish to the surface using circular movements, utilizing the special cloth or gloves provided.
• Ensure that the application environment maintains a temperature between +5°C and +35°C during the application and for 24 hours afterward.

• For best results, allow Nostalgie to dry for 6-8 hours until it’s touch dry, and a full 48 hours for complete drying under standard environmental conditions at 23°C.

For a single coat application, the coverage is as follows:

• 1 liter covers 0.55–0.8 m²
• 1 kilogram covers 0.45–0.65 m²
• Paint consumption for 1 m² is 1250–1700 ml and 1500–2100 g

TDS

• NOSTALGIE TDS

• NOSTALGIE FINISH TDS

SDS

• NOSTALGIE SDS

• NOSTALGIE FINISH SDS