Sandeco - Decostucco

Decostucco

APPLICATION AREA

Decostucco is applied to wall, plaster coating, concrete, and wood surfaces after proper surface preparation with the appropriate primer.

}
Decostucco
}
Decostucco

FEATURES

-Decostucco creates a marble effect on the applied surface.

-Its high brightness creates vivid and shiny colors on the applied surface.

-It is water-based and does not harm human health or the environment.

-Its high water vapor permeability allows water vapor to be expelled, enabling the surface to breathe.

-Its perfumed feature provides a pleasant smell during application.

Sandeco E-Shop Buy

COLORS

Decostucco is a glossy interior decorative coating material based on acrylic emulsion. It contains various types of quartz, limestone, and pigments in the form of a paste, applied with a trowel or spatula.

ALL COLORS

ALL COLORS

ALL COLORS

APPLICATION VIDEO

ADDITIONAL FEATURES

Sandeco

-Start by thoroughly cleaning the application surface to remove any dirt, grease, blistered paint, and dust.

-Correct any surface defects using San Deco Acrylic Putty Interior.

-Apply an undercoat using San Deco Decoprimer after surface preparation.

Sandeco

  • The surface to be painted must be undercoated with Decoprimer.
  • Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
  • The complete drying time is 24 hours. 
  • Once the undercoat is completely dry, apply Decostucco to the surface.
  • Stir Decostucco thoroughly using the mixing spatula.
  • Apply to the surface as a single coat using the Rhombus Trowel. If the desired hiding power is not achieved the second coat can be applied.
  • The complete drying time is 24 hours
  • Once the surface is completely dry, apply the Decostucco product of the selected color to the surface by giving patterns with the help of a fine painting brush.
  • Once the product is completely dry, sand the surface with fine sandpaper, and apply Decostucco, using a trowel.
  • Polish the surface by applying pressure using a Rhombus Trowel.
  • The complete drying time is 24 hours.
  • Apply water-based Wax for a shinier look.
  • Apply water-based WAX to the surface in two coats using a Rhombus Trowel without diluting.
  • Wait 30 min. – 1 hour between coats.
  • Before the second coat is completely dry, start polishing the surface using a polishing machine.
  • The complete drying time of the Wax is 24 hours.

Sandeco

Wait 2-3 hours for touch dry and 24 hours for complete dry under standard environmental conditions at 23°C.

Sandeco

  • 1 liter covers 2.85 to 4.30 m² of surface.
  • 1 kilogram covers 1.65 to 2.50 m² of surface.
  • The paint consumption per 1m² area is between 230-350 milliliters (ml) and 400-600 grams (g).