Beton Deco

Click here for the product brochure.

• Remove any dirt, oil, peeling paint, and dust from the surface.
• Correct any surface imperfections using San Deco Acrylic Putty Interior.
• Begin by applying San Deco Primer to the surfaces. It’s recommended to use a primer of the same color as the selected product color for optimal results.

• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• The complete drying time is 24 hours. 
• Once the undercoat is completely dry, apply Beton Deco to the surface. 
• Stir Beton Deco until it reaches a homogeneous consistency, using a mixing spatula. While still stirring the product, add clean water to reach the required consistency if it is needed.
• Apply to the surface in two coats.
• In the first coat application, slightly press the surface covered with Beton Deco, using a spatula to give the desired texture. Apply this process to the entire surface.
• Once the product is relatively dry, spray some water to the surface and smooth the surface, using a Texturing Float.
• After 5-6 hours, apply the second coat.
• In the second coat application, apply a certain amount of product to the surface with the help of a spatula and create textures.
• After the product is slightly dry, spray some water to the surface and smooth the surface using a spatula.
• The complete drying time is 24-48 hours.
• Once Beton Deco is completely dry, apply the selected color using a roller, and give the final look.
• The complete drying time is 48 hours.

Allow 5-6 hours for the surface to become touch dry for complete drying, it may take 24-48 hours under normal environmental conditions with a temperature of 23°C.

• 1 lt covers 2,25 – 2,85 m² of surface.
• 1 kg covers 1,35 – 1,65 m² of surface.
• The paint consumption for 1m² area is 350–440 ml and 600–750 grams (g).

TDS

• BETON DECO_TDS_ENG

SDS

• BETON_SDS_ENG