APPLICATION AREA
ACROLUX is used on external sides on plaster, exposed concrete, cement sheet and eternit with suitable undercoating.
– Resistant to wiping, and easily cleaned.
– Resistant against weather conditions like rain, snow, extreme hot or cold and also abrasion.
– Gives a modern and clean look to surfaces with decorative non-fading colours.
– Due its high vapor permeability, it allows surface to discharge the steam and breathe.
– Easy application, high coverage.
– As it is water-based, it is harmless to human health and environment.
Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with San Deco Acrylic Putty Exterior, Previously painted surfaces or surfaces that will be painted must be undercoated with San Deco Decoprimer. We recommend using the same colour of undercoat as the selected siding color.
-Before application, dilute Acrolux with 15-20% fresh water and mix the product thoroughly.
-Next, apply Acrolux in two coats using a roller, brush, or spraying method, allowing a minimum of 4 hours between each coat.
-Ensure that the ambient temperature during and within 24 hours after application remains within the range of +5°C to +35°C.
Allow 4-5 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.
Depending on surface smoothness, porosity and application methods, for a single coat application;