Effects Paints
Effects Paints
APPLICATION AREA
Acrylic Transparent Primer 1x7 is applied on surfaces such as gypsum, whitewash, low-quality latex paint with reduced characteristics, and surfaces with high absorption and/or chalking characteristics, such as aerated concrete and similar products.
-Acrylic Transparent Primer 1×7 prevents surface absorbency, reducing paint wastage/consumption.
-It acts as a binding bridge between the final coat of paint and mineral surfaces like concrete, aerated concrete, pressed brick, thin plaster, and chalky surfaces like satin plaster and plasterboard.
-It prevents the early drying of paint and the color variations that may occur on the final coat of paint on surfaces with different absorption characteristics.
-Being water-based, it is environmentally friendly and safe for human health.
Clean the application surface thoroughly, removing any dirt, oil, blistered paint, and dust. Additionally, ensure that surface defects are leveled using San Deco Acrylic Putty Interior.
-Prior to application, dilute one unit of Acrylic Transparent Primer 1×7 with seven parts of water and mix it thoroughly.
-After dilution, proceed with the primer application.
-Ensure that the application environment is maintained between +5°C to +35°C within 24 hours during and after the application.
Allow 4-5 hours for touch dry and 24 hours for complete drying at an environment temperature of 23°C.
Depending on surface smoothness, porosity and application methods, for a single coat application;
