Amarsis | Sandeco

-Begin by thoroughly cleaning the application surface to remove any dirt, grease, blistered paint, and dust.

-Correct any surface defects using San Deco Acrylic Putty Interior.

-Apply an undercoat using San Deco Amarsis Primer after surface preparation.

Brush Application:
-Slowly and gently mix the ready-to-use Amarsis with a spatula without thinning it. Avoid using -mechanical devices during mixing.
-Apply a single coat with a special brush.
-After 25 minutes, use a stainless steel trowel to smooth the decorated surface.
-Apply a second coat of Amarsis after 4-5 hours at 23°C using a brush.
-One hour later, use the stainless steel trowel to apply pressure on the surface, crushing the color particles to create light and dark shades.

Trowel Application:
-Apply Amarsis to the surface with a steel trowel as a single coat.
-After 4-5 hours at 23°C, apply a second coat of Amarsis using the same trowel technique.
-One hour later, use a stainless steel trowel to apply pressure on the surface, crushing the color particles to create light and dark shades.
-Ensure that the application environment maintains a temperature between +5°C and +35°C for 24 hours during and after the application.

For optimal results, allow 4-5 hours for the paint to become touch dry, and a full 24-48 hours for it to completely dry under standard environmental conditions at 23°C.

For a single coat application, the coverage of the paint varies depending on surface smoothness, porosity, and the chosen application methods:

1 liter covers an area ranging from 7.5 to 9 m².
1 kilogram provides coverage for an area spanning from 7.5 to 9 m².
The paint consumption per 1m² area falls within the range of 110-130 milliliters (ml) and 110-130 grams (g).