Sandeco - Baharia



Baharia is designed to be applied to properly prepared interior mineral surfaces. This includes surfaces such as rough cast, concrete, cement sheet, plaster panel surfaces, and even surfaces that have been previously painted.



-Easy to clean.

-Provides a silky matte glossiness to the wall due to its texture.

-High coverage ability.

-Highly vapor permeable, allowing the surface to breathe by enabling the expulsion of vapor.

-Water-based, scentless an it is environmentally friendly.

-Safe for human health.



After cleaning the application surfaces from all types of dirt, oil, blistered paint, and dust, any surface defects should be rectified using San Deco Acrylic Putty Interior. Old painted surfaces or surfaces to be painted should be primed with San Deco Uniprimer.


–Before applying Baharia, dilute it with a maximum of 5-10% fresh water and mix it thoroughly.

-Apply two coats using a roller, brush, or spray, and wait at least 5 hours before applying the second coat.

-Maintain an environment temperature between +5°C and +35°C during and within 24 hours after application.


At a temperature of 23°C, the paint will be touch dry in approximately 5-6 hours, and it will be completely dry within 24 hours.


Depending on surface smoothness, porosity and application methods, for a single coat application;

  • 1 lt covers 11 – 16 m² of surface.
  •  1 kg covers 7, 5– 11 m² of surface.
  • Consumption for 1m² area is 65 -95 ml and 90-135 grams (g).