APPLICATION AREA
Cometa is applied on walls, plaster, rough concrete, and timber surfaces following thorough mixing and surface preparation. Use it in conjunction with a suitable primer.
-By incorporating different colors of Cometa into products like gold,silver,bronze, and similar decorative indoor products, it enables the creation of a wide range of color combinations, thereby expanding the color palette.
-It seamlessly blends when added to Cometa products, ensuring easy mixing.
-Being water-based, it has no harm to human health or the environment.
COLORS
Cometa is an acrylic emulsion-based decorative auxiliary product that enhances color diversity when added in specific proportions to derivatives such as gold,silver,bronze and similar options.
ALL COLORS
-Start by thoroughly cleaning the application surfaces to remove any dirt, oil, blistered paint, and dust.
-Correct any surface defects with San Deco Acrylic Putty Interior.
-For painted surfaces, apply a coat of San Deco Decoprimer after diluting it with clean water at a volume of 20-25%.
-Apply two layers of diluted San Deco Decoprimer to the surface using a brush.
-Ensure that the surface is allowed to fully dry between each layer.
-It is advisable to incorporate Cometa product into gold-silver-bronze, or other varieties at a rate of 9-10%. If a lower flake intensity is desired, these ratios can be decreased accordingly.
-Following this, the Cometa product with Cometa added should be applied to the surface as outlined in its technical bulletin.
-Ensure that the temperature in the application environment remains within the range of +5°C to +35°C during and within 24 hours after the application.
The touch dry time is approximately 4-5 hours at 23°C, while complete drying is achieved within 24 -48 hours at the same temperature.
For a single coat application, the coverage of the paint depends on factors such as surface smoothness, porosity, and the chosen application methods: