Ensure the application surface is free from all types of dirt, oil, blistered paint, and dust. Additionally, level any surface imperfections using San Deco Acrylic Putty Exterior. For surfaces with old paint or those designated for painting, it is imperative to apply a suitable undercoat of San Deco Uniprimer.

-Before application, dilute Dentex Deco with 5-10% fresh water and thoroughly mix it until a homogeneous consistency is achieved.

-The product can be applied using a roller, and the desired pattern can be created using a specific roller type.

-If a thicker texture is preferred, it is advisable to apply Dentex Deco without dilution.

-When applying Dentex product on top of Dentex Deco, wait for 24 hours after the drying time, and then apply DENTEX paint by diluting it with 5-10% water in two coats using a roller.

-Ensure that the ambient temperature during application and for 24 hours afterward remains within the range of +5°C to +35°C.

Depending on surface smoothness, porosity and application methods, for a single coat application:

DENTEX DECO Fine Pattern:

• 1 lt covers 1,25 – 1,55 m² of surface.
• 1 kg covers 0,65– 0,85 m² of surface.
• The paint consumption for 1m² area is 640 -800 ml and 1200 – 1500 grams (g).

DENTEX DECO Thick Pattern:

• 1 lt covers 0,9 – 1,25 m² of surface.
• 1 kg covers 0,50 – 0,70 m² of surface.
• The paint consumption for 1m² area is 800 -1100 ml and 1420 – 2000 grams (g).

TDS

• EP.002.ENG_DENTEX_DECO_TDS_ENG.pdf

SDS

• DENTEX-DECO_DEKA_BOYA_SDS_326060_Ver.3.0EN.pdf