Sandeco - Wax



It is applied on effect paint products like Decostucco to give an appearance of more glossy marble and bright look.



– It increases the brightness of the decorative materials applied on it and gives the surface a shiny marble appearance.

– It is applied very easily with the help of a steel trowel.

– Water-based, does not smell; It is harmless to human health and the environment.

Sandeco E-Shop Buy



The surface intended for Wax application should be thoroughly dry, and any dust or dirt should be completely cleaned before proceeding.


-Apply Wax as two coats using a steel trowel without dilution on the surface where Decostucco application is completed. Allow 30 minutes to 1 hour between each coat at a temperature of 23°C.

-Before the second coat dries, polish it with a velvety cloth for a smooth finish.

-Ensure that the application environment temperature is maintained between +5°C and +35°C during application and for 24 hours afterward for best results.


Under typical 23°C environmental conditions, allow 30 minutes to 1 hour for touch dry and 24 hours for complete drying.


Depending on the surface smoothness, its porosity and the application methods, for a single coat application:

  • 1 lt covers 25,0–34,0 m² of surface.
  • 1 kg covers 25,0–34,0 m² of surface.
  • The paint consumption for 1m² area is 30-40 ml and 30-40 grams (g).