-Start by thoroughly cleaning the application surface to remove any dirt, grease, blistered paint, and dust.

-Correct any surface defects using San Deco Acrylic Putty Interior.

-Apply an undercoat using San Deco Decoprimer after surface preparation.

Application Instructions:

-Ensure that Decostucco is thoroughly mixed before application.
-Apply one layer of Decostucco to the surface using a stainless steel trowel. If the desired smoothness and coverage are not achieved, apply a second coat.
-After allowing the product to dry for 24 hours, use fine sandpaper to sand the surface.
-Apply the desired effect using a trowel or spatula.
To achieve a glossier finish, you can rework the surface with a steel trowel.

Environmental Conditions:
-Ensure that the application environment maintains a temperature between +5°C to +35°C for 24 hours during and after the application.

For optimal results, allow 2-3 hours for the paint to become touch dry, and a full 24 hours for it to completely dry under standard environmental conditions at 23°C.

Depending on the surface smoothness, porosity, and application methods, the paint consumption varies as follows:

• 1 liter covers an area ranging from 2.85 to 4.30 m².
• 1 kilogram provides coverage for an area spanning from 1.65 to 2.50 m².
• The paint consumption per 1m² area falls within the range of 230-350 milliliters (ml) and 400-600 grams (g).

TDS

• DP.014.ENG_DECOSTUCCO_TDS_ENG_Rev1_17112020-2021.pdf

SDS

• DECOSTUCCO_DEKA_BOYA_SDS_326094_Ver.3.0EN.pdf