Click here for the product brochure.

-Begin by thoroughly cleaning the area to remove any dust, dirt, oil, or peeling paint.

-Address any surface irregularities by using San Deco Acrylic Putty Interior to achieve a smooth surface.

-Apply a coat of San Deco Decoprimer to prime the surface before proceeding with the decorative coating. It’s important to ensure proper adhesion and an even finish.

• The surface to be painted must be undercoated with Decoprimer. Dilute Decoprimer with 25-30% of clean water by volume and apply to the surface as a single coat, using a roller.
• Complete drying time is 24 hours. 
• Once the undercoat is completely dry, apply Obiante to the surface.
• Soften Obiante by stirring homogeneously using a mixing spatula without diluting.
• Apply the product to the surface with a steel trowel in the preferred thickness as a single coat in the same amount. Then, create the desired pattern by using the Texturing Float.
• After 20 minutes, when the product starts to dry, spray some clean water, press, and smooth the surface using a steel trowel.
• The complete drying time is 24 hours.
• After complete drying, more than one Pearlescent Decorative Finish product color can be used upon request.
• Complete the application process by applying the selected Decorative Finish color using a roller and gently wiping the surface with the help of a damp sponge.
• The complete drying time is 24 hours.

Under 23°C environmental conditions, allow 5-6 hours for touch dry and 24 hours for complete drying.

Depending on surface smoothness, porosity and application methods, for a single coat application;

• 1 liter covers 0.85–1.15 m²
• 1 kilogram covers 0.5–0.7 m²
• Paint consumption for 1 m² is 850–1150 ml and 1400–2000 g

TDS

• OBIANTE TDS

SDS

• OBIANTE SDS