Sandeco - Denplas



Denplas is applied to properly prepared interior mineral surfaces, such as rough (black) plaster, concrete, cement sheet, plaster panel, and previously painted surfaces with the use of a suitable primer.



-It offers resistance to wiping and is easy to clean.

-It boasts excellent coverage.

-Highly vapor permeable, it allows moisture to escape, enabling the surface to breathe.

-Being water-based and scentless, it is safe for human health and the environment.



After removing all types of dirt, oil, blistered paint, and dust from the application surfaces, surface defects should be corrected with San Deco Acrylic Putty Interior. For surfaces with old paint or those ready to be painted, it is necessary to apply a coat of San Deco Uniprimer as an undercoat.


-Before application, Denplas should be thoroughly mixed by diluting it with a maximum of 20% fresh water.
-Apply 2 coats using a roller, brush, or spraying method, and wait for a minimum of 4 hours before applying the second layer.
-Maintain an environment for application with a temperature between +5°C and +35°C for 24 hours during and after the application.


Allow 4-5 hours for the paint to become touch dry and 24 hours for it to completely dry under 23°C environmental conditions.


Depending on the surface’s smoothness, porosity, and the application method, for a single coat application:

  • 1 liter of paint covers an area of 11.5 – 15 m².
  • 1 kg of paint covers an area of 7.5 – 9.0 m².
  • The paint consumption for 1m² area is 70 – 85 ml and 110 – 135 grams (g).