APPLICATION AREA

Super Ceiling is applied to mineral surfaces, including newly constructed ceilings like rough plaster, concrete, cement sheet, as well as previously painted ceilings, following surface preparation.

Super Ceiling

FEATURES

ADDITIONAL FEATURES

Sandeco

After thoroughly cleaning the application surfaces to remove dirt, oil, blistered paint, and dust, any surface defects should be corrected using San Deco Acrylic Putty Interior. If the surfaces have been previously painted or are intended to be painted, they should be primed with San Deco Uniprimer.

Sandeco

-Before applying Super Ceiling thoroughly mix it by diluting with a maximum of 20-25% fresh water.
-Apply two coats using a brush, roller, or spraying system, and wait at least 2 hours before applying the second coat.
-Maintain an environment temperature between +5°C and +35°C during and 24 hours after the application.

Sandeco

Allow 2-4 hours for touch dry and 24 hours for complete drying under 23°C environmental conditions.

Sandeco

Depending on the surface smoothness, porosity, and application methods, for a single coat application:

  • 1 liter of paint covers an area of 14.5 – 15.5 m².
  • 1 kg of paint covers an area of 8.5 – 9.5 m².
  • The paint consumption for 1m² area is 65 – 70 ml and 105 – 120 grams (g).